kitchen first fix

Kitchen First Fix And Downstairs Toilet First Fix

What we did

For this job we had to install fresh pipework in the kitchen and send the pipes upstairs to connect to the upstairs bathroom as well as sending the pipework through the wall to feed the downstairs cloakroom which was going to have a toilet and basin. We also installed an outside tap and drilled the waste through the wall for the sink and connected it outside in the soil pipe.

All the pipe work in the cloak room was inset in a channel in the wall to conceal the pipework when completed.

kitchen new pipework

Kitchen First Fix

What we did

For this job we first stripped out all the old pipe work which was in bad condition and was not even clipped to the wall. We then put in the pipes for the sink, dishwasher, washing machine, outside tap and re piped up the cold and hot for upstairs. We also had to re pipe up the water meter

All the pipe work was well clipped and ready for the next stage of the kitchen fitting.

radiator install

New Radiator Position In Bedroom And Towel Rail

What we did

For this job we had to first drain down the system and remove the old radiators we then pulled to the floor boards up in the room opposite where the radiator is going to bring some pipes though for the new radiator. We then installed both radiators and refilled the system and added some inhibitor to protect the heating system.

Both radiators look very good and the towel rail has added functionality for the bathroom.

large heating system

Commercial Unit Heating Installation

What we did

For this job we had to install many radiators throughout a unit. As you can see there were a lot of radiators and many more throughout the property

This new column radiator looks very stylish and really suits the room as well as knocking out a lot of heat if needed.

stylish column radiator

Column Radiator

What we did

For this job we had to first drain down the system and remove the old radiator pipes. We then installed the new radiator with the bolts provide. We then drilled down into the cellar and connected the pipes after that we added some inhibitor and refilled the system to test. We used chrome pipes from the radiator to add the to the visual appeal.

This new column radiator looks very stylish and really suits the room as well as knocking out a lot of heat if needed.

new downstairs bathroom

Downstairs Wet Room

What we did

To install this wet room we worked with a builder. We did a first fix originally where we moved where the shower was going to go aswell as remove a radiator and install the pipes and waste for the toilet and basin. Then once the tiling had been done we installed the new shower and screen as well as the need toilet and vanity basin.

As you can see the wet room turned out very nice and the customer was very pleased with the results

bath replacement

Bath

What we did

The customer had a shower which we removed along with some tiles to make room for the new bath. We then altered the pipework for the hot and cold as well as the waste. We then installed the new bath

The bath was of good quality which we fitted along with the new taps

low pressure shower

Pumped Shower

What we did

For this job we had to install a new pupmed shower to replace an old one which had stopped working. Pumped shower are for areas with low or intermittent water pressure. We installed the shower and ran it through the commissioning procedure which makes sure the shower doesn’t get damaged after installation

All parts for this job were provided by the customer

old fashioned bathroom radiator

Designer Towel Rail

What we did

Here we have a very interesting bathroom radiator. There was already some pipework in the bathroom from an old radiator which we cut back and then connected onto for this radiator. We also connected a heating element so the radiator can be use without having to turn on the the customers complete heating system.

This is an excellent quality radiator which suits this bathroom very well and was supplied with the valves by the customer

low level toilet replaced

Low Level Toilet

What we did

This old low level toilet was looking a little old, dirty and was not secure to the floor. We removed the old toilet and fitted a new low level toilet. We had to cut out a little of the carpet as the new toilet was a slightly different design and didn’t fit in the exact same place. The customer said they would be sorting the carpet shortly.

This new good quality toilet looks a lot better than the old one and is a lot safer now it is securely fitted.